High temperature flange components often need to be sealed with high temperature on the plane. If there is no good sealant for additional sealing in the separate pressure area, the production will be inaccurate or deformed under the influence of pressure, that is to say, leakage will occur in the separate pressure area under pressure, which requires unscheduled repair. At present, Bokos high-temperature sealant is better used in the field of high-temperature plane seals. Its special formula makes it inert in standard applications of steam and gas turbines and high-temperature flanges. Therefore, it can withstand hot air, steam, water, light fuel oil and lubricants, and can withstand crude oil and natural gas. It is a single component, paste sealant, industrial use, high-quality sealing mixture, and suitable for working conditions requiring high temperature and pressure for smooth and flat sealing surfaces (butt joints). Spread on the dry surface with a plaster knife or rubber scraper. As the sealing products will not cure, but their consistency will change slightly, and remain flexible and elastic, there is no time requirement in use, and they can be put into operation immediately after construction without waiting. If the high-temperature sealing surface with scratch damage needs to be repaired, it should be used in conjunction with Bokos high-temperature F series repair products.
Product CenterProduct Center
Steel Flange
Stainless Steel Flange
Carbon Steel Flange
ANSI Standard Flange
JIS B2220 Steel Flange
EN1092 Steel Flange
Non Standard Flange Forgings
TEL£º15861609828
TEL£º15861609828
QQ£º707378883
E-mail£º707378883@qq.com
Address£ºJiangyin City Zhouzhuang Town Nijia lane village Hongta Road No. 15